GPS receiver performance can be degraded by using antenna cables that are too long (greater than 50 feet), or by exposure to electromagnetic interference (EMI).
Stay Connected, Wherever You Go – Best GPS Inline Amplifiers
Our inline amplifiers offer an easy and affordable way to boost the performance of your GNSS system.
Amplified signal loss solutions
Connectivity options
Small form factor
Multi-frequency and constellation
GPS L1/L2/L5
GLONASS G1/G2
Galileo E1/E5a/E5b/E6
BeiDou B1/B2
Upper Band Correction Signals
Stronger GPS, Smarter Navigation – Best GPS Amplifiers
Issues related to loss of signals
Signal loss occurs when GNSS signals weaken as they travel through long cables. This can make it hard for the receiver to detect the signal, sometimes causing a complete loss. Receivers need a certain signal strength to work properly, and long cables can reduce this strength below the required level.
Improved Solutions
Signal loss depends on the cable's quality and length. For RG-58 cables, over 30 meters can cause issues. Our inline amplifiers fix this by boosting the GNSS signal. This reduces signal weakening. With proper amplification, cable lengths can be much longer. Better cables allow even greater distances.
Interference Mitigation
Interference can disrupt weak GNSS signals. Our inline amplifiers help by filtering out unwanted noise. They block interference and allow GNSS signals to pass through clearly.
Durable, Versatile, and Simple to Install
Our GPS inline amplifiers are tough, adaptable, and easy to install. They are made with gold-plated brass and have watertight packaging. You can get them with SMA, TNC, BNC, or N connectors.
Installation is simple, just connect the amplifier to your antenna cable. It uses the same power as the antenna, so no extra power source is needed. All GPS Amplifiers come with a one-year warranty for parts and labor.
GPS Inline Amplifier Specifications
Inline amplifiers with TNC connectors are 3.770 inches long. The length may vary slightly with “N” and “SMA” connectors.
The typical noise figure for 1575 inline amplifiers is <3 dB.
The typical noise figure for L1L2 inline amplifiers is <4 dB.
Input voltage for all models ranges from 3.3 to 28 V DC.
Current consumption is <36 mA (typically 25 mA).
Operating temperature ranges from –40°C (-40°F) to +70°C (158°F).
Storage temperature ranges from -55°C (-67°F) to +85°C (185°F).
Relative humidity: 0 - 100% condensing.
IP Rating: IP67.
Certified to safety standards UL 62368-1/CSA No. 62368-1 (currently for 1575 models only).
Whatsapp Us